MTBF is one of the most quoted and most misunderstood reliability numbers. A power supply rated at 100,000 hours MTBF won't run for 11 years in your living room. The number describes how often failures happen across many units, not how long one unit lasts.
The formula
MTBF = total operating time ÷ number of failures
Example: 100 units each run 1,000 hours, and 4 fail and are repaired. 100 × 1,000 ÷ 4 = 25,000 hours MTBF.
MTBF, MTTF and MTTR
| Measure | Means | Used for |
|---|---|---|
| MTBF | Mean time between failures | Repairable products and systems |
| MTTF | Mean time to failure | Items replaced when they fail |
| MTTR | Mean time to repair | How fast failures are fixed |
Availability combines them: the share of time a system works is MTBF ÷ (MTBF + MTTR).
How MTBF is misread
- It's not a lifetime. If the failure rate is constant, about 63% of units fail before reaching the MTBF, and 37% survive past it.
- It often ignores wear-out. Lab MTBF usually covers the "useful life" phase, not the end-of-life failures that decide how long a product actually lasts.
- Methods differ. Calculated MTBF (from component data) and field MTBF (from real failures) can differ a lot.
Reliability, durability and EU rules
The EU is moving from reliability marketing to durability requirements. Ecodesign rules already set minimum lifetimes for some products, such as cycles for smartphone batteries or hours for light sources, and ESPR makes durability and reliability product aspects every new delegated act can regulate. Real failure data also feeds the right to repair: which parts fail, when, and whether they can be replaced.
Use field data, not just the datasheet
Warranty claims, RMAs and repairs, linked to each unit's purchase date and serial number, show how products really fail: by model, batch and age. That's the reliability number that matters to customers, and to your warranty costs.
Official sources
Frequently asked questions
How do you calculate MTBF?
Divide the total operating time of all units by the number of failures. For example, 100 units running 1,000 hours each with 4 failures: 100,000 hours ÷ 4 = 25,000 hours MTBF.
What is the difference between MTBF and MTTF?
MTBF is for repairable items: the average time between failures, with repairs in between. MTTF is for items that are replaced when they fail, like a light bulb or a fuse: the average time until they fail.
Does a high MTBF mean a product will last that long?
No. MTBF is an average across many units during their useful life. With a constant failure rate, only about 37% of units are still working at the MTBF. It also usually excludes wear-out at the end of life.
What is a good MTBF?
It depends entirely on the product. Hard drives and power supplies often quote hundreds of thousands of hours from lab calculations, while field data is usually lower. Compare MTBF only between products measured the same way.
How do brands measure real-world reliability?
From field data: warranty claims, returns and repairs, linked to each unit's purchase date and serial number. That shows failure rates by model, batch and age, which lab MTBF estimates can't.
