Veribl logo

Regulations

What is the UKCA marking?

Written by
Veribl
Updated

The UKCA (UK Conformity Assessed) marking is Great Britain's product conformity mark, introduced after Brexit as the counterpart to the EU's CE marking. For most products, Great Britain now accepts the CE marking indefinitely, so manufacturers can use either CE or UKCA. Northern Ireland follows EU rules and uses CE, with UKNI where a UK body assessed the product.

  • Stands for: UK Conformity Assessed
  • Market: Great Britain (England, Scotland, Wales)
  • CE recognition: Accepted indefinitely in GB for products under 21 regulations, including toys, electrical equipment, radio equipment and machinery, since October 1, 2024
  • Exceptions: Construction products, medical devices and some other sectors have their own rules
  • Northern Ireland: Follows EU rules: CE marking, plus UKNI when a UK notified body did the assessment
  • Paperwork: UK Declaration of Conformity and technical documentation when using UKCA

After Brexit, Great Britain created its own conformity mark, UKCA, to replace the CE marking. Then, after years of delays, the UK decided to keep accepting CE marking indefinitely for most products. Today, most brands selling in both markets simply use CE.

UKCA vs CE in Great Britain

CEUKCA
MarketEU and EEA, and accepted in GB for most productsGreat Britain
Legal basisEU harmonisation lawsGB product regulations
DeclarationEU Declaration of ConformityUK Declaration of Conformity
Third-party bodyEU notified bodyUK approved body
Northern IrelandRequired (with UKNI if a UK body assessed)Not valid on its own

Indefinite CE recognition

The Product Safety and Metrology etc. (Amendment) Regulations 2024 took effect on October 1, 2024. For products under 21 regulations, including toys, low voltage electrical equipment, EMC, radio equipment, machinery, PPE and gas appliances, Great Britain accepts the CE marking with no end date. They also created a "fast-track" UKCA route that recognizes EU requirements.

Where UKCA is still relevant

  • Sectors outside the 21 regulations, such as construction products and some others, which have their own rules.
  • Medical devices, which follow separate UK rules.
  • Assessments by a UK approved body, which lead to UKCA.

Northern Ireland

Under the Windsor Framework, Northern Ireland follows EU product rules. Products there need the CE marking, and the UKNI mark alongside it when a UK notified body did the mandatory third-party assessment.

What brands should do

  1. Check your product's GB regulation to confirm CE is accepted.
  2. Watch for GB-specific differences, such as RoHS exemptions or labeling, even with CE.
  3. Keep EU and UK declarations together with the product, so each market's paperwork is ready. See CE marking.

Official sources

Frequently asked questions

Do I need UKCA or CE to sell in Great Britain?

For most products covered by the 21 regulations in the 2024 UK legislation, including toys, electrical equipment, radio equipment and machinery, either works: Great Britain accepts the CE marking indefinitely. Some sectors, like construction products and medical devices, have their own rules, so check your product's regulation.

Is UKCA still required at all?

It's still available and required in some cases, for example where a product's sector isn't covered by indefinite CE recognition, or where a UK approved body carried out the conformity assessment. For most consumer products, CE alone is enough in GB.

What is the UKNI marking?

A mark used in Northern Ireland alongside the CE marking when a UK notified body, rather than an EU one, carried out a mandatory third-party conformity assessment. Northern Ireland otherwise follows EU product rules.

Can a product carry both CE and UKCA?

Yes. Products can carry both markings, as long as they meet the requirements behind each one.

Does CE recognition in GB mean UK and EU rules are identical?

Not always. CE-marked products must still meet GB requirements that differ, such as GB RoHS exemptions or specific labeling rules, so check the GB regulations for your product.