Before a product gets the CE marking, someone has to check that it meets the EU rules that apply to it. That check is conformity assessment. For most products the manufacturer can do it alone. For higher-risk ones, the law calls in a notified body.
How conformity assessment works
- Identify the applicable EU laws and their essential requirements.
- Pick the procedure (module) each law allows for your product.
- Assess: test, document and, where required, involve a notified body.
- Draw up the technical documentation and sign the EU declaration of conformity.
- Affix the CE marking, with the notified body's number if it's involved in production control.
The modules
| Module | What it is | Notified body? |
|---|---|---|
| A | Internal production control | No |
| B | EU type examination (combined with C, D, E or F) | Yes |
| C | Conformity to type based on internal production control | No, after B |
| D, E | Production or product quality assurance | Yes |
| F, G | Product verification, unit verification | Yes |
| H | Full quality assurance | Yes |
Each EU law says which modules are allowed. Some allow a choice depending on whether harmonised standards were applied.
What a notified body is
A notified body is an organization designated by an EU country as competent to carry out specific conformity assessment tasks under a specific law, and notified to the Commission and the other EU countries. Each has a 4-digit number and is listed in the Commission's NANDO database with exactly what it's notified for.
When you need one
Typical examples are some machinery, PPE in categories II and III, medical devices, pressure equipment, lifts, gas appliances and, under the Cyber Resilience Act, important and critical products with digital elements in some cases. Toys need one when harmonised standards aren't fully applied. Check your product's law: it decides.
Official sources
Frequently asked questions
Do I need a notified body for CE marking?
Only if the EU law for your product requires it. Most consumer electronics, toys meeting harmonised standards and many other products can be self-assessed under Module A. Higher-risk products, such as some machinery, PPE, medical devices and pressure equipment, need a notified body.
How do I find a notified body?
Search the Commission's NANDO database by law and procedure. It lists every notified body, its 4-digit number and exactly what it's notified for. Choose one notified for your product's legislation and assessment module.
What are conformity assessment modules?
Standard procedures set in Decision 768/2008/EC, from Module A (internal production control) through type examination (B) and production quality assurance (D, E) to full quality assurance (H). Each EU law says which modules a product can use.
Where does the notified body number go?
Next to the CE marking, when the notified body is involved in the production control phase. It's also listed on the EU declaration of conformity.
Is a notified body the same as a test lab?
Not necessarily. A test lab can test products for anyone, but only a notified body is designated to carry out the conformity assessment tasks a specific EU law reserves for it. Many notified bodies also run labs.
