The CE marking on a product is a claim. The technical documentation is the evidence behind it. Every manufacturer that affixes CE marking must be able to show authorities how the product meets each requirement, and that's what the technical file is for.
What goes in a technical file
- General description of the product and its intended use
- Design and manufacturing information: drawings, diagrams, parts lists, circuit diagrams
- Risk assessment: the hazards and how they're addressed
- Standards and specifications applied: harmonised standards or other solutions
- Test reports and calculations
- Copies of certificates from a notified body, where one was involved
- The EU declaration of conformity
- Labels, markings and instructions
Each product law has its own list, so check the annex of every law that applies.
Keeping and sharing it
- Retention: usually 10 years after the product is placed on the market.
- On request: market surveillance authorities can ask for it, and the manufacturer must provide it, often within a short deadline.
- Non-EU manufacturers: the authorised representative or importer must be able to provide it.
- Not public: customers and competitors aren't entitled to it.
Under GPSR
The GPSR extends the idea to consumer products without CE marking: manufacturers must draw up technical documentation with the product's risk analysis and the solutions adopted, and keep it for 10 years.
Technical file vs Digital Product Passport
| Technical file | Digital Product Passport | |
|---|---|---|
| Audience | Authorities, notified bodies | Consumers, businesses, authorities |
| Public | No | Partly, with access levels |
| Contains | Design, risk assessment, test evidence | Product information required by the delegated act |
| Overlap | Declaration of conformity, materials, substances | Declaration of conformity, materials, substances |
Keeping both from the same product record avoids the passport and the file telling different stories.
Official sources
Frequently asked questions
What should a technical file contain?
Typically: a general description of the product, design and manufacturing drawings and parts lists, the risk assessment, the list of harmonised standards or other specifications applied, test reports and calculations, the EU declaration of conformity, labels and instructions. Each EU law lists its own requirements.
How long must technical documentation be kept?
Usually 10 years after the last product of that type is placed on the market, as set by each product law. Some laws set different periods, so check the one that applies.
Who can ask to see the technical file?
Market surveillance authorities of the EU countries, on a reasoned request. Notified bodies see what they need for their assessment. It isn't a public document and customers aren't entitled to it.
Can the authorised representative keep the technical file?
Yes, if the mandate says so. For non-EU manufacturers, the authorised representative or importer must be able to provide the technical documentation, or make sure it's provided, when authorities ask.
How is the technical file different from a Digital Product Passport?
The technical file is internal evidence for authorities. The passport is public, or partly restricted, information for consumers, businesses and authorities. Some documents overlap, such as the declaration of conformity, and keeping both from one source avoids conflicts.
